発行時期: 2020-07-17 12:20:36
ブラウズ:
Dual in-line package (DIP)
Dual in-line is probably the most well-known package design. It looks like a thick, hard shell with two rows of external pins protruding from both sides and bending downward. DIP consists of three different technologies (see figure below). Chips designed for high-reliability applications are packaged in prefabricated ceramic DIP bodies. This package consists of a hard ceramic shell and leads embedded in the ceramic body. The area of the adhesive sheet is a cavity recessed into the ceramic body. The final seal is completed by a metal cover with solder or a ceramic cover plate sealed with glass.
Another DIP method is CERDIP, which stands for ceramic dual in-line package. This type of package is composed of a ceramic substrate and a pin system buried under the glass layer. The chip is pasted on the substrate and wire bonding is completed with the lead frame. The glass cover is bonded between the ceramic cover and the substrate to complete the seal. The structure of CERDIP is used for a series of package types. Most DIP packaging is done using epoxy resin molding technology. In this technique, the chip is pasted on a lead frame and wire bonding is completed. After pressure welding, the frame is placed in a plastic packaging machine, epoxy resin surrounds the chip, and the bonding wire and internal pins form the package shell.
Pin grid array
A larger chip with more pins makes the DIP package structure too large to be suitable for production. The pin grid array is a package designed specifically for larger chips. It looks like a pre-made "sandwich" with external pins protruding from the bottom of the package in the form of pins (see figure below). In the cavity formed on the top or bottom of the package, the chip is completed in the adhesive bonding process, usually using bump/flip-chip welding technology. Unlike most chips, the connection points are strictly limited to the bonding pads around the periphery of the chip. The connection points on the chips of the pin grid array cover the entire chip area. The ceramic PGA is sealed by welding a metal cover.
Ball Grid Array (BGA)
BGA and PGA packages have similar shapes. Unlike PGA, where pin-shaped leads are drawn from the bottom of the package, BGA uses a series of solder bumps (solder balls) to complete the circuit connection between the package and the PCB (see the figure below). This basically uses the same technology that connects the chip to the package.
The effect of this package is to reduce the height of the package and reduce the weight. At the same time, the number of pins is increased by using the entire chip surface to plan the bonding points. Balls (or bumps) also cause the problem of absorbing stress, which is caused by the difference in thermal expansion between the package and B.
Four-side lead package
Although PGA is a convenient design for packaging larger chips, the ceramic structure is still very expensive compared to epoxy resin encapsulation. This consideration has led to the development of "four-sided" packages. A four-sided package is made of epoxy resin encapsulation technology, but the pins extend from all four sides of the package (see figure below).
Thin package
New products like smart cards require thin packages. There are several different techniques for manufacturing thin packages. It is called flat package, small outline package (TSOP), small outline integrated circuit (SO℃) or ultra-thin package (UTP). The production of thin packages uses the same technology as DIP. This type of packaged device is designed to be flat, with the leads bent out to the side of the package (see figure below). The overall height of the ultra-thin package does not exceed the range of 1 mm. There is also a quad flat pack (QFP).
Chip size package
In the field of integrated circuits, the perfect package is no package. It is recognized that any package will lead to resistance, quality, and opportunities and costs that degrade circuit performance. In general, the smaller the package size, the lower the packaging cost, so that higher packaging density can be achieved. Chip-sized packages meet this requirement. Its simple package size does not exceed 1.2 times the chip size. The challenge is to provide sufficient mechanical and environmental protection so that it can be easily connected to the PCB.
The commonly popular design method is chip flip-chip soldering technology, which uses ball grid array and top drop glue protection. Advances towards smaller packages and more reliable electrical connections have led to microsphere grid arrays.
Pin on chip (LOC)
The LOC package designed for large chips moves the bonding point to the middle of the chip (see figure below). The pins of the package sit on a soft pad covering the surface of the chip.